This is the first version of the GRIP-GRAB Spring Clamp - Arm Version

It's designed to be a compact, reliable and effective clamp with a variety of uses.

The GRIP-GRAB Handle Unit, Spring and Clamp Arms are all separate elements and are easily replaced or customised by swapping for other designs if required. They are also compatible with the other GRIP-GRAB Spring Clamps.

The Clamp Arms are available in 3 different styles: Flat, Curved & Interlocking for different uses.

The Clamp Spring is available in 5 different tensions ranging 1 to 5 ( 1 being weak tension to 5 being strong tension.)

Quality Print Settings:

Layer Height: 0.2mm

Infill: 15-100% (depending on the component)

Handle: 25%

Spring: 100% (Use concentric pattern for surface & infill)

Clamps: 25%

Print Speed: 45-60mm/s (Keep the speed low for the best quality)

Supports are required for the lugs on the Spring & Clamp Arms

Construction:

Please see the accompanying PDF showing the simple build process.

NOTE: Allow the Spring element to cool after printing before use. Also, on first use, gently partial flex the spring several times before full compression.