Hi ! My print of "Meowth multicolor" by "PressPrint" Printer: "Ender-3 V3 SE" For all files Scale: 100% Sliced with: Creality Print v4.3.7 (material "CR-PLA", quality "Normal") (Quality ->) Layer height: 0.1 mm, Initial Layer Height: 0.2 mm. (Shell ->) Z Seam Alignment: User Specified, Z Seam Position: Back Left, Z Seam X: 0.00 mm, Z Seam Y: 110.00 mm. (Infill ->) Infill Density: 10 % (Build Plate Adhesion ->) Build Plate Adhesion Type: skirt File "meowth body with moustache.stl" Be careful, this 3D model seems to have have geometric errors. And the slicing result may not be as expected. (With Creality Print v4.3.7.6619-win64, profil quality "High Quality", I obtained slicing results where some socket gaps were partially filled, I had to use the "Normal" quality profile with modifed layer height 0.1 mm (but not the initial layer height) to obtain consistent slicing during preview.) (Build Plate Adhesion ->) Build Plate Adhesion Type: brim (Support ->) Generate Support: Yes, Support Structure: Tree Strong, Support Placement: Touching Build Plate, Enable Support Brim: Yes Filament used: PLA+ Silk gris ArianePlast. Printing time: ~ 4h06 File "meowth pink ears.stl" Printing time: ~ 0h10 Filament used: PLA+ Silk Pink ArianePlast Files: "meowth black eyes.stl" and "meowth black ears.stl" in the same print. During printing I reduced the feedrate to 50%. To be sure to allow time for the already printed part to cool sufficiently. Printing time: ~ 0h26 Filament used: PLA Black Velleman File "meowth feet (brown).stl" Printing time: ~ 0h15 Filament used: PLA Recyclé ArianPlast File "meowth white eyes.stl" Printing time: ~ 0h23 Filament used: PLA Eco Blanc ArianePlast File "meowth golden thingy.stl" Printing time: ~ 0h06 Filament used: PLA Yellow Velleman After removing the printing supports, sanding/scraping the printing defects, gluing ( still need a little sanding, a quick blast with a heat gun to remove the last angel hairs. And unfortunately the pupils ("meowth black eyes.stl") don't really fit and I broke them and partially wedged them while trying to force... because there were poorly printed. ) Posted as an entry for "Introducing the Exciting November 3D Printing Event!" https://www.crealitycloud.com/post-detail/6540a6fc42c4bce0a33bd62c "November 3D Printing Event" https://www.crealitycloud.com/contest/november-3d-printing-event Good continuation to all !