Hi ! My print, of "KAWS PLANTER WITH CACTUS (DIVIDED BY COLOURS)" by "Aslan3D". Slicer: Creality Print v4.3.8.6678 (Win). Printer profile "Ender-3 V3 KE_0.4 nozzel". Material profile "CR-PLA_1.75" modified (Temperature, Printing Temperature: 215.00 °C, Initial Printing Temperature: 215.00 °C, Final Printing Temperature: 215.00 °C, Auto Temperature: No.). Parameter config "Normal" (0.20mm). Scale: 100% File(s): cactus.stl (brim) gcode file: k-vert-cactus-Ender-3 V3 KE_0.4_CR-PLA 215_1h51m.gcode Filament: PLA Silk Vert ArianePlast (~ 21,334m) ~ 01 h 51 m 54 s File(s): HUESOS.stl (brim) gcode file: k-gris-HUESOS-Ender-3 V3 KE_0.4_CR-PLA 215_1h31m.gcode Filament: PLA High Speed Gray Anycubic (~ 14,720m) ~ 01 h 33 m 39 s File(s): tierra.stl (With a Filament Change "M600" at ";Layer:162") gcode file: k-grisM600Jaune-tierra-Ender-3 V3 KE_0.4_CR-PLA 215_41m.gcode Filament: PLA High Speed Gray Anycubic, PLA Yellow PolyMaker (~ 9,584m) ~ 00 h 41 m 40 s File(s): OJOS.stl gcode file: k-noir-OJOS-Ender-3 V3 KE_0.4_CR-PLA 215_4m.gcode Filament: PLA Recyclé ArianePlast (~ 0,317m) ~ 00 h 04 m 48 s File(s): kaws colores con filtro.stl (brim) gcode file: k-blanc-kaws colores con filtro-Ender-3 V3 KE_0.4_CR-PLA 215_2h0m.gcode Filament: PLA+ Blanc ArianePlast (~ 18,367m) ~ 02 h 03 m 04 s After deburring, assembly and gluing. Posted as an entry to the "Christmas 3D Printing Event!" https://www.crealitycloud.com/post-detail/65839ead3e2577f851884efd https://www.crealitycloud.com/contest/christmas-3d-printing-event Print made as part of a test of the Creality "Ender-3 V3 KE" for https://www.lesimprimantes3d.fr/ https://www.lesimprimantes3d.fr/forum/topic/56116-creality-ender-3-v3-ke-la-d%C3%A9couverte-avant-le-test/ Good continuation to all.