Cuva Santa a companion who's always there for you and plays with you, I really like the glow in the dark version which greets me with his glow during night and early morning. The model can be printed easily from 50% to greater than 100% scale. The model is available for everyone hope it brings joy for all. YouTube short link: https://youtube.com/shorts/gXJsO36XDKo?feature=share Model Link: https://www.crealitycloud.com/model-detail/6585bf118622406339155fbf Bed adhesion= raft: 5mm, The neck inside the model 1 should be printed without supports so add support blockers for head, neck and belt. To print beyond 100% scale use model 2. Print settings: Printer: Ender3 Max, Slicer: Creality 4.8.2, Nozzle: 0.4mm, Filament: PLA, Temperature: Hot end=210C, Bed= 90C (glue stick not required), Layer height: 0.2mm, Wall thickness: 1mm, Speed: Outer wall= 25, inner wall= 50, infill: 90, Flow: Outerwall= 100%, inner wall, infill= 102%, Line width: support interface, infill, outer wall=0.26mm, inner wall=0.74mm, Infill : Grid=5% , Support: pattern= zigzag | density= 11%, Interface top and bottom = Lines | density= 18%, Offset: Z= 0.24mm, X,Y = 0.5mm, Retraction:3mm speed 25mm, Combing : all, Bed adhesion : Raft 5mm, Thank you, Have a nice day, Regards, Sigma Designers