Hey all! I just printed (in PLA) [%5497278866]'s Hatsune Miku Keychain model using my Bambu Lab X1 Carbon with its AMS (Automatic Material System)... Sorry I don't have a Creality 3D printer, but I really liked the model, so I got the filament that roughly matched the design, and it came out great (pic attached). It's not perfect, but I like it. Settings are default as when you download (with points) the STL. I literally downloaded the model and then colored it in Orca Slicer using some Overture branded Light Gray and Inland (i.e. MicroCenter branded) Beige, Turqoise, and Black PLA filaments to make this make and I really like how it came out. I have the 3MF (not sure if any of the Creality supported slicers can read that file format) file if anyone wants it. I also have the GCode exported from Orca Slicer if anyone wants it. Print time is 1h3m using the 100% speed preset (with about 5 or so minutes of that being prep time, i.e. auto bed leveling, bed preheating, etc). Here are some links to the filaments I used if you want to replicate my print/make exactly: (I don't know why only the Amazon link is directly clickable.... Odd.) Overture Light Gray: https://www.amazon.com/dp/B07PFV1CFX?ref=ppx_yo2ov_dt_b_fed_asin_title Inland Beige: https://www.microcenter.com/product/670211/inland-175mm-pla-high-speed-3d-printer-filament-10-kg-(22-lbs)-cardboard-spool-beige Inland Turqoise: https://www.microcenter.com/product/512132/inland-175mm-pla-3d-printer-filament-1kg-(22-lbs)-cardboard-spool-turquoise Inland Black: https://www.microcenter.com/product/611532/inland-175mm-pla-plus-(pla)-3d-printer-filament-1-kg-(22-lbs)-spool-black Enjoy!