Falconsson - Grinder Shuriken Keyslinger (Multicolor)Hey! I managed to find a logical reason to use a shuriken in modern times!. it has a purpose: its a key chain (every body has some keys right?). Large enough to be easily found, small enough to fit in pocket. The design is multicolor, so can be printed in different flashy colors to make it joyful to eye while spinning. Above mentioned features makes it a great stress relief toy at the same time. Join my Patreon to have commercial license to print&sell my designs! https://www.patreon.com/Falconsson Falconsson designs & social media: https://linktr.ee/falconsson http://falconsson.com License: PRIVATE USE its print in place, no supports needed, do not use any raft, edge or skirt. 10%-15% infill is fine, leave any other setting as default or change according to your wish. Color Options A-Of course you can print with a single color (will be much faster). B-The design is multi-color, if you have a multi-color printer you can set the color of body, center ring and each blade according to your wish. C-also there is an option to print center ring and the body separately so a two color product can be achieved with a single color printer. If you do so, be careful while pushing the center ring in place. It has enough tolerance but if printed with a fragile filament, ring can break. ( you can always print another ring anyway)Wish me luck in the competition, May the perfect first layer be with you, See you on the next design![%1786422819]