When i first got my creality hi combo everything was working awesome, the prints were fast and quick to start now.... it takes 20 minutes for the heatbed to heat up and is doing a bunch of crazy stuff before each print. this happened after i updated these online params (because i usually update stuff when it tells me). it also seems like it added a bunch of different gcode to the machine start gcode. here is the full gcode i have now but i think it was something else when i first got the printer, does anyone have the original that comes with the printer? or would this even affect how long it takes to start a print? M140 S0 M104 S0 START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] T[initial_no_support_extruder] M104 S[nozzle_temperature_initial_lay1er] M204 S2000 G1 Z3 F600 M83 G1 Y150 F12000 G1 X0 F12000 G1 Z0.2 F600 G1 X0 Y150 F6000 G1 X0 Y0 E15 F6000 G1 X150 Y0 E15 F6000 G92 E0 G1 Z1 F600 also is there a way to completely uninstall creality print v6 so it removes all user settings (i tried doing a factory reset on the printer but nothing changed.