Rose Decor.

Feel free to scale it as desired. For sure you can make it bigger. If you choose a smaller size, the model will be more prone to damage. Don’t be tempted by a shorter printing time—take your time to print it properly, and you won’t have to print it twice! :)

If reducing print time is absolutely essential for you, you can simply increase the layer height. Just keep in mind that this will also reduce the level of detail.

Be careful when removing supports. Leafs might be fragile.

Printed with fuzzy skin effect.

Fuzzy Skin: All Walls

Fuzzy Skin Point Distance: 0.4

Fuzzy Skin thickness: 0.2

If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo

All my photos are real and show an actual 3D-printed figure photographed by me.

As always!

The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.

Print File：

rose-001.stl_PLA_2h26m42s 