If you're new to 3D printing, terms like "shells," "walls," and "perimeters" might sound confusing. These are essential elements that determine the strength, surface quality, and durability of your prints. In this guide, we'll break down what each one means, how they affect your print, and how to adjust them properly for better results.

What Are Shells, Walls, and Perimeters?

In most slicer software (like Cura or PrusaSlicer), these terms often overlap or refer to similar settings:

Shells generally refer to the outer structure of your model - the visible parts.

Walls are the vertical outer lines that make up the sides of your model.

Perimeters is another word for walls, especially in slicers like PrusaSlicer.

When your printer begins a layer, it usually starts by printing the perimeter(s) - one or more outer lines that trace the shape. After that, it fills in the inside.

Why They Matter

Strength and Durability

More walls = a stronger object. This is particularly important if the print will undergo stress or be used functionally.

Surface Quality

Thicker shells can improve the appearance of your print by covering up internal infill patterns or minor inconsistencies.

Print Time and Material Usage

The more walls you add, the longer the print takes and the more filament it uses. There's a balance between quality and efficiency.

Common Settings

Wall Line Count (or Perimeters): This is the number of outer lines printed per layer. Most default slicer settings use 2 or 3.

Wall Thickness: If your nozzle is 0.4mm, and you set the wall thickness to 1.2mm, it will print 3 lines (0.4mm x 3).

Outer Wall vs. Inner Wall: Some slicers allow you to specify print order and speed for outer walls separately for better finish.

Tips for Beginners

Start with 2-3 walls unless you're printing something thin or very strong.

Use more walls (4-5) for functional prints like brackets or tools.

Keep your wall thickness a multiple of your nozzle diameter to avoid slicing errors or gaps.

For decorative models, 1-2 walls are often fine to save time and material.

Conclusion

Understanding how shells, walls, and perimeters work helps you optimize your prints for both quality and function. With just a few setting tweaks, you can dramatically improve your 3D printing results - whether you're aiming for beautiful surface finishes or sturdy mechanical parts.

Understanding shells, walls, and perimeters in your prints