My second hueforge creation have fun with it. I only used 4 colors. Sunlu filament and for the white i used ellegoo rapid pla. you can always use other branche of filament. you can scale it, not the z-axis.

project: wolferine.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 241.8x241.8mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA+ Sunlu Red Transmission Distance: 6

PLA+ Sunlu Pure Yellow Transmission Distance: 5

PLA PolyLite White Transmission Distance: 5

PLA+ Sunlu White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Red

At layer #9 (0.8mm) swap to Pure Yellow

At layer #10 (0.88mm) swap to Red

At layer #11 (0.96mm) swap to Pure Yellow

At layer #14 (1.2mm) swap to White

At layer #18 (1.52mm) swap to Pure Yellow

At layer #23 (1.92mm) swap to White for the rest.

Wolferine hueforge

user6435464669

Yazdırma Ayarları(1)

0.2mm layer, 2 walls, 15% infill

Açıklama

Lisans

Etiketler

İlgili Modeller