Wall Plant Pots Collection Commercial License: You can print and sell these models. Concept: A plant pot which can be placed on floor against wall and can also be hanged on wall to save space. As the pot is only 180 degrees unlike regular pots it saves spaces over places like stairs, indoor, E.T.C . Total available 9 models. The models are available with and without drain hole. Video link: https://www.youtube.com/channel/UCl81Wd0-LmacT_TfOnIf2PQ 3D printing settings: Slicer software: Creality slicer, Printer: FDM / RESIN, Filaments: PLA, PETG, ABS, E.T.C, Retraction: 4mm speed 40, Nozzle Temp: minimum 190 to 210 C bed 90 C for PLA (no glue stick/adhesive needed) Infill: Minimum 8%, Print in place, Support: No supports needed, if necessary, turn on make overhang printable. Ignore watertight error, Layer height: 0.24, (use high diameter nozzle for fast printing) Build plate adhesion: brim at least 10mm, Thank you, Have a cute day. Regards, Sigma Designers.

https://www.youtube.com/watch?v=HS-pPBswFfw Hi all.. here is the link for the timelapse of the model: Alien plant pot The timelapse also includes horse wall plant pot.  Hope you like it. The models are commercial you can print and sell them. Thank you, Have a nice day.