There are still continuous errors when using creality wifi box to send models to print to the printer, and / or view live with the creality camera what is being printed. I installed creality wifi box several weeks ago, and I see continuous errors, as follows: 1.- Frequently it does not detect that the printer is connected, or it does not detect the model of the printer (in my case an Ender 3 Max Neo). 2.- Very often the image of the camera disappears and gives error messages. 3.- Since today I can't send to print models loaded on line. Once sent through the mobile application, the printer starts to warm up and moves to a central position, but there it stops and does not advance. So I can only copy the gcode file to the sd card and start printing manually directly through the screen of the printer itself. To try to solve it, I have deleted the printer, reinstalled the mobile application and reinstalled the creality wifi box again. But the problem has not been fixed. So I hope the technical team knows how to give a solution to this problem. I clarify that the creality wify box that I have is version 1. I hope for any help and/or solution. Thank you very much. Translated with www.DeepL.com/Translator (free version)